🚚 Order within the next 0 Day(s), 2 hours, 15 minutes, 27 seconds for delivery by 13 Jul, 2025.
Couldn't load pickup availability
Pickup available at Mercury AV - Warehouse Collection Point
Usually ready in 4 hours
Martin Audio Warranty : 2 YEARS - Terms Apply
Pairs well with
Martin Audio IK41-DANTE 4-Channel Power Amp
£6,599.00
Need help?
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
Product details
Overview
The iKON iK41 is an advanced 4-channel power amplifier which combines high power density with superb audio performance, state-of-the-art DSP and network control. A dedicated controller amplifier for Martin Audio WPM line arrays, TORUS 8, and selected other systems, the iK41 can also provide multi-channel amplification for select Martin Audio loudspeakers.
Features Four channels of efficient Class D amplification High power density in 2U rack height Up to 6,000 Watts total power output, depending on load impedance High performance 96kHz DSP on all inputs and outputs (48kHz on outputs when implementing FIR filters) Switch mode power supply Global mains operation, 85V to 240V auto-sensing Intuitive, user-friendly, front panel interface Analogue, AES3 and Dante™ digital audio network inputs Ethernet network for system operation, control and monitoring via Martin Audio VU-NET™ software Comprehensive protection and monitoring functions
Specifications
General TYPE Four-channel Class D amplifier
POWER OUTPUT (*) 1500W into 2-Ohms 1500W into 4-Ohms 750W into 8-Ohms 325W into 16-Ohms 3000W bridged per channel pair, 4-Ohms 3000W bridged per channel pair, 8-Ohms
CV LINE OUTPUT (*) 685W, 25V line 1500W, 70V line 1163W, 100V line
DIGITAL SIGNAL PROCESSING 96kHz/48kHz DSP on all inputs and outputs COOLING Dual vari-speed fans, front-to-back airflow MAXIMUM AMBIENT TEMPERATURE 40°C (104°F)
Audio Inputs/Outputs ANALOGUE IN/LINK (4 CHANNELS) 4 x female 4 x male Neutrik™ XLR ANALOGUE INPUT IMPEDANCE 20kO balanced to ground MAXIMUM ANALOGUE INPUT LEVEL +20dBu AES3 IN/LINK (2 CHANNELS) 1 x female, 1 x male Neutrik™ XLR, balanced DANTE™ (4 CHANNELS) 2 x shielded RJ45, primary and secondary AMPLIFIER OUTPUTS 4 x Neutrik Speakon™ NL4
Audio Performance DYNAMIC RANGE >113dBA, analogue input >114dBA AES/Dante™ input FREQUENCY RESPONSE 7Hz-30kHz (-2.5dB points, 4O load) TOTAL HARMONIC DISTORTION <0.05% typical @ 1kHz, 4O load SLEW RATE >60V per microsecond DAMPING FACTOR >800 at amplifier output, ref 8O
Control and Monitoring Network PROTOCOL Ethernet CONTROL APPLICATION Martin Audio VU-NET™
Digital Signal Processing SAMPLE RATE 96kHz (48kHz for FIR filter implementation) PHYSICAL INPUTS 4 x analogue 1 x AES pair with link output 4 x Dante™ inputs routable to four DSP drive modules DRIVE MODULE INPUT DSP Input signal routing, delay, gain, HPF, Phase, Mute EQ: 2 x low shelf, 6 x PEQ/bandpass and FIR shelving filters DRIVE MODULE OUTPUT DSP Source, delay, gain, Phase, Mute, crossover filters, limiters EQ: low shelf, 8 x PEQ / band pass and shelving filters
Power Supply TYPE High performance Series Resonant AC INPUT OPERATING RANGE 85 – 240V ~ AC, 47 - 63Hz MAINS INRUSH CURRENT 6A at 115V, 12A at 230V (max for <10ms) MAINS CONNECTOR Neutrik 32A Powercon™
Physical DIMENSIONS (W) 482 x (H) 2U/88mm x (D) 441mm (W) 18.98in x (H) 2U/3.46in x (D) 17.35in (incl handles and optional rear support) WEIGHT 12.5kg (27.5lbs)
